top of page
Newspapers

AUTHENTISE NEWS

Find all of Authentise's press releases, dev blogs and additive manufacturing thought pieces right here.

Large-Format Additive Manufacturing: What Changes When the Build Gets Bigger?

Nov 10
5 min read

A larger printer does not simply make the same parts on a bigger scale. As the build grows, the process, material, accuracy, thermal behaviour and finishing requirements all affect what can be made successfully.


Large-format additive manufacturing can be useful for things such as production tooling, patterns and large structural components. “Large-format” is used across processes with different machine sizes and capabilities. Here, it means systems designed to make parts beyond the typical envelope of smaller AM machines; the useful scale depends on the process and the part.


The useful question is not just “Will it fit in the machine?” It is “Can the process make the part to the required quality, and can the finished part be handled, inspected and used?”


Robotic extrusion system building a large layered industrial mould on a factory floor.


What counts as large-format additive manufacturing?

“Large-format” does not have one size threshold that applies across every AM process. It is a practical description for systems that make parts beyond the typical envelope of smaller machines. The relevant scale might be measured in hundreds of millimetres, metres, or by a part’s mass and handling requirements.


That distinction matters. A large polymer extrusion system and a wire-arc metal system may both be called large-format AM, but they use different feedstocks, energy sources and process controls.


Two examples show how different the trade-offs can be:

Process

Typical feedstock and possible uses

Main considerations

Large-format polymer extrusion

Thermoplastic pellets, sometimes reinforced with fibres; can suit large tooling, patterns and structural forms

Larger deposited beads can limit detail and surface quality. Material flow and heat management affect geometry and build quality.

Wire-arc directed energy deposition (DED)

Metal wire deposited and fused using an electric arc; can suit large metal structures and near-net-shape components

Heat input can create residual stress and distortion. Machining and inspection may be needed to reach the required final geometry and quality.

These are examples, not a complete list. The best process depends on the part, material, performance requirements and available finishing route.


Bigger parts bring a resolution trade-off

Large-format systems often need to deposit material quickly to make long builds practical. In polymer extrusion, that can mean wider beads and larger layer heights than in smaller machines. The part may take less time to build, but fine details and surface finish can be harder to achieve directly.


An Oak Ridge National Laboratory study of Big Area Additive Manufacturing (BAAM) describes how limited print resolution and poor control of extruder flow rate can create geometric deviations. The researchers tested control approaches to improve part quality.


This does not mean large parts are inherently inaccurate. It means accuracy needs to be considered alongside the process and the part’s purpose. A large mould or manufacturing tool may tolerate a different surface finish from a component with close-fitting interfaces.

When a design includes critical surfaces, teams should decide early whether to print them directly, leave material for machining, or change the design to make finishing easier.


Heat and distortion matter across the build

Material deposited during a build heats the surrounding structure. As it cools, it contracts. In extrusion-based polymer builds, repeated heating and cooling can contribute to residual stress, warping or cracking. The effects depend on the material, geometry and process conditions. An ORNL study of carbon-fibre/ABS made with BAAM examined how the build’s thermal behaviour relates to warping and cracking.


The effect depends on the material, geometry, deposition sequence and process conditions. It is not simply a matter of setting the machine to a particular temperature and leaving it to run. Research at ORNL has examined how thermal evolution in large thermoplastic composite builds relates to warping and cracking, while its work on wire-arc metal AM identifies distortion and residual stress as production challenges for large structures.


That makes build planning important. A long, thin component may behave differently from a compact block of similar overall volume. Geometry, support strategy, deposition path and cooling conditions can all influence the result.


The machine’s build volume is only one constraint

A part may fit within a machine’s stated build volume and still be difficult to produce or use. The team also needs to consider:

  • clearance for the deposition head or robot;

  • how the part will be supported during the build;

  • access for inspection and finishing;

  • whether the machine can handle the part’s material and geometry;

  • how the part will be removed, lifted and transported;

  • whether suitable machining or finishing capacity is available.


For a large component, handling and finishing can shape the design just as much as the printer does. A part that cannot be safely moved to inspection or a machine tool is not ready for production simply because the build completed.


One large part or several joined parts?

Building a component in one piece can reduce assembly steps or avoid some joints. But a single large build may require more machine time, a more demanding support strategy and additional finishing.


Splitting the design into sections can make production or handling easier, but introduces interfaces that must be designed, manufactured and joined to meet the part’s requirements. Neither approach is automatically better. Compare the finished component and its complete production route, including assembly, inspection and any required machining.


Where large-format AM can make sense

Large-format AM is worth considering when the part’s size, geometry, material or production context suits the process. Examples include:

  • large tooling and moulds;

  • patterns used in other manufacturing processes;

  • structural components where a suitable deposition process and material are available;

  • parts that would otherwise require extensive tooling or assembly.


These are potential applications, not guarantees of lower cost or faster delivery. A large build can consume substantial material and machine time, and the finished part may need significant post-processing. The business case depends on the complete route from feedstock to accepted component.

Plan the whole route before choosing the printer

Before committing to a large-format process, define the part’s requirements and work backwards:

  1. Set the part requirements. Identify the important dimensions, surfaces, material properties and inspection needs.

  2. Choose a process and material together. Check that the process can handle the feedstock and meet the intended application’s requirements.

  3. Plan for thermal behaviour and geometry. Consider build orientation, deposition sequence, supports and the risk of distortion.

  4. Include finishing and inspection. Establish how the part will be machined, measured and accepted.

  5. Check handling and production capacity. Confirm that equipment is available for removal, transport and any follow-on operations.


Qualification and measurement requirements also need attention, particularly for high-consequence applications. NIST identifies areas such as dimensional metrology and post-processing qualification among the ongoing needs for additive manufacturing part qualification.


The scale changes the trade-offs

Large-format additive manufacturing expands the range of part sizes that can be made, but it does not remove the usual manufacturing questions. It makes some of them more visible: how fast material can be deposited, how much detail is needed, how the part will respond to heat, and what must happen after the build.


The printer’s envelope is a starting point. The real decision is whether the complete process can produce a part that meets its requirements and can be finished, inspected and used.

For a broader overview of process families, materials and applications, see the complete guide to additive manufacturing technologies. For metal applications, see Metal 3D Printing Costs: What Drives the Full Production Cost?.

bottom of page
window.addEventListener("message", function (event) { // Inspect event.data in console to see what the bot emits if (!event.data) return; // Log all messages to see what your specific bot emits upon submission console.log("Chatbot message received:", event.data); // Check if the event matches a lead/submission event from the bot // (Replace 'form_submit' with the exact event name your chatbot emits) if ( event.data.type === "form_submit" || event.data.action === "lead_submitted" || JSON.stringify(event.data).includes("lead") ) { window.dataLayer = window.dataLayer || []; window.dataLayer.push({ event: "chat_interaction", element_id: "chatbot", form_id: "chatbot", action: "form_submission" }); } });